dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine, A/T Controls - A/T Upshift/Downshift Issues|Page 5838 > < Engine Controls - MIL ON/DTC P0452 Set In Memory|Page 5833
Page 1
background image

PROM - Programmable Read Only Memory: All Technical Service Bulletins
Engine, A/T Controls - A/T Upshift/Downshift Issues

NUMBER: 21-001-09

GROUP: Transmission

DATE: January 10, 2009

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 9.04 OR HIGHER.

StarMOBILE DESKTOP CLIENT -OR- StarMOBILE STANDALONE MODE MAY ALSO BE USED TO PERFORM THE FLASH.

SUBJECT:
Flash: 6 Speed Automatic Transmission Shift Improvements

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM).

MODELS:

2007 - 2008

(JS)

Sebring/Avenger/Sebring Convertible

NOTE:

This Bulletin applies to models equipped with a 3.5L engine & 62TE automatic transmission (Sales Code EGF with DG2).

SYMPTOM/CONDITION:

Some customers may experience transmission shift or performance concerns as follows:

i.

During a rapid coast down while braking a bump may be felt just before a stop (2007 model year)

ii.

3 - 2 kickdown bump or harshness (2007 model year)

iii.

2 - 3 upshift bump or harshness (2007 and 2008 model years)

iv.

4 - 3 - 4 change mind shift bump (2007 model year)

v.

Improved shift quality/driveability through all gear transactions (2007 and 2008 model years)

DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine Systems are functioning as
designed. If DTC's are present record them on the repair order and repair as necessary before proceeding further with this bulletin.

If the above symptom/condition is experienced or can be verified, perform the Repair Procedure.

PARTS REQUIRED:

Engine, A/T Controls - A/T Upshift/Downshift Issues|Page 5838 > < Engine Controls - MIL ON/DTC P0452 Set In Memory|Page 5833