dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Engine Controls - MIL ON DTC P050D Set|Page 5746 > < Engine, A/T Controls - A/T Upshift/Downshift Issues|Page 5741
Page 1
background image

PROM - Programmable Read Only Memory: Customer Interest
Engine Controls - MIL ON DTC P050D Set

NUMBER: 18-010-08

GROUP: Vehicle Performance

DATE: February 23, 2008

THE StarSCAN(R) FLASH FILES FOR THIS BULLETIN MUST BE RETRIEVED FROM THE INTERNET.

StarSCAN(R) SOFTWARE LEVEL MUST BE AT RELEASE 8.04 OR HIGHER.

StarMOBILE DESKTOP CLIENT -OR- StarMOBILE STANDALONE MODE MAY ALSO BE USED TO PERFORM THE FLASH.

SUBJECT:
Flash: MIL Illumination with DTC P050D

OVERVIEW:
This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software.

MODELS:

2007

(JS41)

Sebring

2007 - 2008

(JS41)

Avenger

2008

(JS27)

Sebring Convertible

NOTE:

This bulletin applies to models equipped with a 3.5L engine and California Emissions (Sales Codes EGF with NAE) built prior to July 23, 2007
(MDH 0723XX).

SYMPTOM/CONDITION:

Some customers may experience intermittent MIL Illumination. No other symptoms will be noted or experienced. Further investigation by the technician
may find DTC P050D - Cold

Start Rough Idle

DIAGNOSIS:
Using a Scan Tool (StarSCAN(R)) with the appropriate Diagnostic Procedures available in TechCONNECT, verify all engine systems are functioning as
designed. If DTC's other than those listed above are present record them on the repair order and repair as necessary before proceeding further with this
bulletin.

If the above symptom/condition is experienced, perform the Repair Procedure.

PARTS REQUIRED:

Engine Controls - MIL ON DTC P050D Set|Page 5746 > < Engine, A/T Controls - A/T Upshift/Downshift Issues|Page 5741