Avenger V6-3.5L (2008)
Systems/Testing and Inspection/Diagnostic Trouble Code Tests and Associated Procedures/Verification Tests/Supplemental Restraints
Verification Test
Passenger Airbag - Removal
REMOVAL
1. Open hood.
2. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the system reserve capacitor to discharge before servicing any airbag components. Failure to do this
may result in serious or fatal injury.
3. Remove the glove box See: Body and Frame/Interior Moulding / Trim/Glove Compartment/Service and Repair/Instrument Panel Glove Box -
Removal.
4. Remove two fasteners (2) retaining PAB to instrument panel assembly inside glove box opening.
5. Disconnect the two PAB squib connectors (1).
6. Remove instrument panel top pad from instrument panel See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
