Avenger V6-3.5L (2008)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
AWD
AWD
1. Release fuel pressure from the fuel system, See: Engine, Cooling and Exhaust/Engine/Cylinder Head Assembly/Fuel Pressure Release/Service and
Repair.
2. Remove the fuel tank assembly, See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service and Repair/Fuel Tank -
Removal.
NOTE: Mark the location of the fuel level sensor prior to removal. The fuel level sensor has to be properly located in the fuel tank for the
fuel gauge to work properly.
3. Remove the fuel level sensor lock ring (2) using special tool 9318.
4. Remove fuel level sensor from fuel tank.
5. Disconnect fuel transfer tube quick connect fitting from fuel level sensor.