Avenger V6-3.5L (2008)
NOTE: Diesel battery harness shown, gasoline battery harness similar.
4. On diesel engine equipped vehicles:
-
Connect the glow plug module connector (14)
-
Connect the cabin heater relay connectors (11 and 13)
-
Connect the in-line connector to the instrument panel harness (12)
5. Install the remote positive battery terminal (2) onto the mounting bracket on the left strut tower (15) by pushing straight down until fully engaged.
6. Remove the cover (1) from the remote positive battery terminal (2). Position the starter harness positive cable (3) onto the remote positive battery
post. Install the retaining nut (4) and tighten to 16.5 Nm (145 in. lbs.) Install the cover (1) onto the remote positive battery terminal (2).
