Avenger V6-3.5L (2008)
d.
Select "Restore Vehicle Configuration".
e.
Press "Start".
f.
Follow the prompts listed on the StarSCAN(R).
g.
When prompted, Enter the full 17 digit VIN found on the VIN plate.
NOTE:
Assure the correct VIN is input into the StarSCAN(R).
h.
Select "Next".
NOTE:
The StarSCAN(R) must be connected to the dealer network drop.
i.
Follow the prompts listed on the StarSCAN(R).
6.
Check and clear any Diagnostic Trouble Codes (DTC's) that may have been set.
7.
Turn the ignition key to the "OFF" position and remove the StarSCAN(R) unit, StarSCAN(R) cable, and battery charger from the vehicle.