Avenger V6-3.5L (2008)
NOTE: Position the toe link cam (3) to the reference mark made during the removal to ease with setting the rear toe adjustment.
8. Install the toe link cam bolt and nut (1) attaching the toe link (2) to the rear suspension crossmember tighten to 34 Nm (25 ft. lbs.).
9. If equipped, install the rear drive module from the vehicle See: Transmission and Drivetrain/Differential Assembly/Service and Repair/Removal
and Replacement/Rear Driveline Module/Installation.
10. Install the exhaust system to the vehicle See: Engine, Cooling and Exhaust/Exhaust System/Service and Repair/Removal and
Replacement/Installation - Exhaust System.
11. Install tire and wheel assembly and tighten wheel mounting nuts (3) to 135 Nm (100 ft. lbs.) See: Wheels and Tires/Service and Repair/Removal
and Replacement/Tires and Wheels - Installation.
12. Install the upper suspension bracket nuts and tighten to 23 Nm (17 ft. lbs.).
13. Install spare tire to the vehicle.
14. Check and reset the rear wheel alignment to meet the preferred specifications See: Alignment/Service and Repair.
