Avenger V6-3.5L (2008)
8. Remove any clips (2) retaining the brake rotor (3) to the wheel mounting studs.
9. Slide the brake rotor (3) off the hub and bearing (1).
10. Unclip the wheel speed sensor head (1) from the retainer on the rear of the hub and bearing (2).
11. Remove the four bolts (1) securing the hub and bearing to the knuckle.
12. Remove the hub and bearing.
Front-Wheel-Drive
FRONT-WHEEL-DRIVE
NOTE: Before proceeding, See: Service Precautions/Rear Suspension.
1. Raise and support the vehicle. See: Maintenance
