Avenger V6-3.5L (2008)
Shift Interlock Cable: Adjustments
ADJUSTMENT - INTERLOCK CABLE
1. Remove center console assembly See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Removal.
2. Move the gear shifter to PARK and the ignition key to the LOCK position.
3. If the interlock cable is being replaced, remove the pin to allow cable to "self adjust." Press locking clip by hand to secure adjustment.
4. If the interlock cable is not being replaced, the pin will not exist. Loosen the locking clip on the interlock cable to allow cable to "self adjust."
Press locking clip by hand to secure adjustment.
5. Install center console assembly See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Center Console - Installation.
