Avenger V6-3.5L (2008)
Power Window Switch: Service and Repair
Installation
INSTALLATION
SWITCH - FRONT DOOR
1. Install the switch by snapping into place.
2. Connect switch wire connector.
3. Install the door trim panel See: Body and Frame/Doors, Hood and Trunk/Doors/Front Door/Front Door Panel/Service and Repair/Front Door Trim
Panel - Installation.
4. Connect the battery negative cable.
SWITCH - REAR DOOR
1. Install the switch to the handle.
2. Connect the electrical connector.
3. Install the interior door handle. See: Body and Frame/Doors, Hood and Trunk/Doors/Rear Door/Rear Door Handle/Rear Door Interior
Handle/Service and Repair/Rear Door Interior Handle - Installation.
4. Connect the battery negative cable.
