AW 150 Ramcharger V8-360 59L: Idle Speed System Information
1985 2.2L-2V Light Duty Truck Dodge Ram Van, Dodge Caravan & Plymouth Voyager Only
Equipped With "50 States" Emission Package
Consisting of:
1 - Carburetor (manual or automatic
PN 4342891
transmission)
Also order conversion hardware package.
1 - Hardware Package
PN 4342950
Consisting of:
1 - Carburetor Base Gasket
PN 4095975
1 - H.A.C.
PN 4306202
1 - Hose Routing Diagram
NPN
1 - Mounting Bracket (H.A.C.)
PN 4105199
1 - H.A.C. Hose Harness
NPN
3 - Mounting Screws
NPN
INSTRUCTIONS
-
Remove carburetor per instructions in appropriate engine performance/electrical shop manual.
-
Install new carburetor with new base gasket.
FIGURE 6 - High Altitude Compensator Mounting
-
Install altitude compensator with bracket (Figure 6).
-
Install altitude compensator vacuum hose harness, route as shown in hose routing diagram (Figure 6).
-
Warm up engine.
-
Set engine idle speed to specified VECI label specification.
-
Set high fast idle on Step 3 (lowest) to specification.
-
Double check hose routing and installation of fuel lines.
-
Type in changes made on the Emission Update Label PN 4275084 and affix to engine compartment next to VECI label.
-
The high altitude adjustments are now complete.
