AW 150 Ramcharger V8-360 5.9L (1985)
INSTRUCTIONS
-
Remove existing carburetor.
-
Install new carburetor PN 4342807 along with new carburetor base gasket PN 3698365.
-
Raise the rear wheels of the vehicle with the transmission in neutral. Rotate the rear wheels through one revolution and determine the axle ratio.
-
If the vehicle has a 3.55 or 4.10 axle, replace EGR valve with PN 4287659 and gasket PN 4287938.
-
Start engine and check for leaks.
-
Type in changes made on Emission Update Label and affix to engine compartment next to VECI label.
5.9L-4V Light Duty Trucks All Manual Models With Federal Emission Package
Consisting of:
1 - Carburetor
PN 4342807
1 - Carburetor Base Gasket
PN 3698365
INSTRUCTIONS
-
Remove original carburetor.
-
Install replacement carburetor PN 4342807 using new base gasket PN 3698365.
-
Start engine and check for leaks.
-
Type in changes made on Emission Update Label PN 4275084 and affix to engine compartment next to original VECI label.
