AW 150 Ramcharger V8-360 5.9L (1985)
3.
Install 90~ end of supply heater hose, PN 4361142, onto the intake manifold nipple. Route this heater supply hose post the carburetor choke
housing and install the straight end on the heater core or on the water valve, if the vehicle has air conditioning. This hose must be cut to length as
required. Install this heater supply hose into the hose bracket previously attached to the intake manifold.
FIGURE 4
4.
Using tie wraps, PN 6015756, secure supply heater hose to automatic transmission dip stick tube. Use caution as not to deform dip stick tube, as
this will make transmission fluid level checks difficult or impossible. Using tie wraps, tie the supply and return heater hoses together as illustrated
in Figure 4.
