AW 150 Ramcharger V8-360 5.9L (1985)
FIGURE 2
6.
Install supplied vacuum harness, PN 4324484 for "B" van and PN 4324485 for "D" and "W". Connect vacuum hoses and install new solenoid
where old solenoid was removed. Refer to hose routing, Figure 1 for "D" and "W" and Figure 2 for "B" van.
7.
Use 3/16" vacuum hose, PN 4026511, for the bowl vent signal line. Refer to appropriate Figure 1 or 2 for routing.
8.
Using service manual procedure, reset carburetor float height to .375".
