B150 1/2 Ton Van L6-225 3.7L VIN E 1-bbl (1982)
4.
Spread the strands of each wire apart (Example 1).
5.
Push the ends of the wire together until the strands are close to the insulation (Example 2).
6.
Twist the wires together (Example 3).
7.
Solder the twisted wire ends using a ROSIN CORE SOLDER.
8.
Slide the piece of heat shrink tubing down to cover the splice. Be careful to center the tubing on the splice. Using a heat gun, heat the tubing until
it shrinks and seals the splice.
9.
Connect the battery.
