Testing and Inspection for Parking Brake Cable for B150 1/2 Ton Van L6-225 37L VIN E 1-bbl
Parking Brake Cable: Adjustments
1. Release parking brake lever and loosen cable adjusting nut to be sure cable is slack.
2. With rear wheel brakes properly adjusted tighten cable adjusting nut until a slight drag is felt when the rear wheels are rotated. Then loosen the
cable adjusting nut until both rear wheels can be rotated freely.
3. To complete the operation, back off an additional two turns of the cable adjusting nut.
4. Apply and release parking brake several times to be sure rear wheels are not dragging when cable is in released position.
