B150 1/2 Ton Van V6-239 3.9L (1989)
Front Door Carpet/Mat Scuff Plate
3. Remove the retaining screws and the front door carpet/mat scuff plates.
4. Remove the engine cover. If necessary, refer to the removal procedure.
Side Cargo Door Carpet/Mat Scuff Plates
5. Remove the retaining screws and the side cargo door carpet/mat scuff plate.
Rear Cargo Door Carpet/Mat Scuff Plate
6. Remove the retaining screws and the rear cargo door carpet/mat scuff plate.
7. Remove the carpets/mats from the floor panel.
INSTALLATION
1. Position the carpets/mats on the floor panel.
2. Install the trim panels. If necessary, refer to the installation procedures.
3. Install the scuff plates and the retaining screws. Tighten the retaining screws with 1 Nm (12 in. lbs.) torque.
4. Install the engine cover.
5. Install seat and all the components that were removed to facilitate carpet/mat removal.
