B150 1/2 Ton Van V6-239 3.9L (1989)
Electronic Brake Control Module: Service and Repair
Fig 2 RWAL Electronic Brake Control Module
REMOVAL
1. Remove right side sill plate.
2. Remove right side cowl cover.
3. Remove 3 screws that attach electronic brake control module to side cowl.
4. Disconnect wiring from electronic brake control module.
INSTALLATION
1. Connect wiring to electronic brake control module.
2. Install 3 screws that attach electronic brake control module to side cowl.
3. Install right side cowl cover.
4. Install right side sill plate.