B250 3/4 Ton Van L6-225 3.7L (1984)
Fig. 25 Checking oil pump cover flatness. Typical
Lay a straightedge across pump cover surface. If a 0.0015 inch feeler gauge can be inserted between cover and straightedge, replace pump assembly.
Fig. 26 Measuring outer rotor thickness
If outer rotor thickness measures 0.649 inch on 1980 or 0.825 inch or less on 1981-87 engines, and the diameter is 2.469 inches or less, replace shaft
and both rotors.
Fig. 27 Measuring inner rotor thickness
Shaft and both rotors should also be replaced if inner rotor thickness measures 0.649 inch or less on 1980, or 0.825 or less on 1981-87 engines.