B250 3/4 Ton Van L6-225 3.7L VIN H 1-bbl (1987)
Fig. 13 Typical disassembled view of Chrysler electronic 6 cylinder distributor with dual pickup
1.
Remove rotor and vacuum advance unit, if equipped Figs. 12 and 13.
2.
Remove reluctor by prying up from bottom of reluctor using two screwdrivers with a maximum blade width of 7/16 in. Use care not to damage or
distort reluctor teeth.
3.
Remove two screws and lockwashers attaching lower plate to distributor housing, then lift out lower plate, upper plate and pickup coil as an
assembly. Do not remove distributor cap clamp springs.
