B250 3/4 Ton Van L6-225 3.7L VIN H 1-bbl (1987)
Clutch Switch: Testing and Inspection
Clutch Switch Test (Manual Transmission Only)
Exc. 1986-87 Mini-Vans/Wagons
1. Disconnect double connector at switch pigtail, then connect a 12 volt power source to either end of switch terminal.
2. Connect a suitable test light to remaining terminal end and ground.
3. Test light should be "on" when pedal is in normal position and "off" when pedal is depressed.
4. If above step is not as specified, replace clutch switch.