B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Rear Door Panel: Service and Repair
Dual Cargo Doors
REMOVAL
1. Open the right cargo door, Open the left cargo door if the trim panel is being removed.
2. Right cargo door. Remove the retaining screw and the door inside handle.
Inside Handle Opening Protector Removal
3. Right cargo door. Use trim sticks, or similar devices, to remove the door inside handle opening protector halves:
-
insert trim sticks under the upper protector half;
-
use a plastic mallet and a blunt tool and gently tap on the upper half until it is released from the trim panel;
-
remove the upper protector half from the trim panel; and then
-
tap the lower protector half upward and remove it from the trim panel.
Dual Cargo Door Trim Panels
4. Use a trim removal tool, or a similar device, to pry the trim panel away from door inner panel.
5. Remove the trim panel from the door.
INSTALLATION