B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Trim Panel
5. Remove the trim panel from the door.
INSTALLATION
1. Position the trim panel on the door inner panel with the clip retainers aligned with the holes.
2. Push inward and force the clip retainers into the door panel holes around the perimeter of the trim panel.
3. Insert the lower protector half into the door handle opening and "seat" it in the lower part of the opening.
4. Insert the upper protector half in the door handle opening and "seat" it in the upper part of the opening.
5. Position the door inside handle on the actuator and install the retaining screw. Tighten the screw with 11 Nm (95 in. lbs.) torque.
