B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Left Cowl Side & Front Wheelhouse Trim Panels
Right Cowl Side & Front Wheelhouse Trim Panels
COWL SIDE TRIM PANEL REMOVAL
1. Remove the retaining screws and the front wheelhouse trim panel from the wheelhouse outer panel.
2. Remove the retaining screws and the cowl side trim panel from the cowl panel.
INSTALLATION
1. Position the cowl side trim panel at the cowl panel with the screw holes aligned.
2. Install the trim panel retaining screws in the cowl panel. Tighten the screws with 2 Nm (17 in. lbs.) torque. Avoid over-tightening the screws.
3. Position front wheelhouse trim panel at the wheelhouse outer panel with the screw holes aligned. Tighten the screws with 2 Nm (17 in. lbs.)
torque. Avoid over-tightening the screws.
WINDSHIELD HEADER, A-PILLAR AND FRONT DOOR HEADER TRIM PANELS REMOVAL
When removing an interior trim panel that is overlapped by an adjacent trim panel, remove the nearest attaching screw in the adjacent trim panel to
avoid possible damage to both trim panels.
