B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Catalytic Converter: Service and Repair
Exhaust System
REMOVAL
1. Remove clamp holding muffler to converter.
2. Remove muffler from converter (it may be necessary to heat the pipe connection).
3. Remove clamp securing converter to header pipe.
4. Remove converter from header pipe (it may be necessary to heat the pipe connection).
INSTALLATION
1. Install converter to header pipe with a new clamp.
2. Reposition rear exhaust pipe hanger.
3. Install muffler to converter with a new clamp.
4. Start the engine and inspect for exhaust leaks.
NOTE: Replace any missing or damaged heat shields.
