B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Brake Light Switch: Adjustments
Brake Switch
Brake Switch Adjustment
NOTE:
The brake switch is mounted to the brake pedal support.
ADJUSTMENT PROCEDURE
1.
Push switch through clip in mounting bracket until switch seats in bracket. Brake pedal will move forward slightly.
2.
Pull brake pedal rearward as far as it will go Pedal tang will "ratchet" switch to correct position as pedal is pulled rearward.
3.
Verify that stop light switch does not prevent full pedal return. Incomplete return will cause brake drag and premature wear.
