Dodge Workshop Service and Repair Manuals

Ignition Hall Effect Sensor: Service and Repair

NOTE:

Distributor removal is not necessary to the pick-up assembly.

REMOVAL

1.

Remove distributor cap from distributor (two screws).

2.

Disconnect pick-up harness from main engine wiring harness.

3.

Remove distributor rotor from distributor shaft.

Distributor (Hall Effect) Pick-up

4.

Lift the pick-up assembly from the distributor housing.

INSTALLATION

1.

Install the pick-up to the distributor. Align the pick-up into the notch on the distributor.

2.

Connect wiring harness.

3.

Install rotor.

4.

Install distributor cap.