B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
Suspension Spring ( Coil / Leaf ): Service and Repair
Leaf Spring Replacement
Front
1. Raise vehicle until weight is removed from springs, then support spring using suitable jack.
2. Remove nuts, lock washers, U-bolts and U-bolt seat securing spring to axle.
3. Remove spring shackle attaching bolts, shackles and spring front eye bolt.
4. Remove spring from vehicle.
5. Reverse procedure to install.
Rear
1. Raise and support vehicle.
2. Remove U-bolt attaching nuts, U-bolts and plate.
3. Remove front pivot attaching bolt, then the rear shackle attaching nuts.
4. Remove outer shackle and bolt from hanger, then the spring. Some vehicles are equipped with one piece shackles.
5. Reverse procedure to install.