B250 3/4 Ton Van V8-318 5.2L VIN T FI (1992)
CAUTION: Use care to prevent the inner wheel bearing and bearing seal from contacting the axle tube spindle threads during
installation. Otherwise, the threads, bearing, and seal could be damaged.
7. Carefully slide the hub onto the axle. Install the outer wheel bearing, the locktab and outer wheel bearing locknut.
8. Tighten the adjustment nut to 163-190 Nm (120-140 ft. lbs.) while rotating the wheel.
9. Loosen the adjustment nut 1/8 of-a-turn to provide 0.001-inch to 0.010-inch wheel bearing end play.
10. Tap the locking wedge into the spindle keyway and adjustment nut.
11. Install the axle shaft.
