B250 3/4 Ton Van V8-360 5.9L VIN 1 4-bbl (1987)
1.
Remove the fuel tank gauge unit from the fuel tank per service manual procedure and discard. Install the new seal and gauge/pump unit
from the applicable kit. Use extreme caution to protect the float and gauge assembly during installation into the fuel tank.
2.
With the fuel tank partially raised, connect the fuel tank vent hose, fuel return, and fuel supply hoses. Secure the hoses with the hose
clamps provided.
3.
Feed red and yellow molds of body wiring harness, PN 4362293, through slot in the crossmember. Remove existing screw for gauge unit
ground. Install eyelet terminal of harness, PN 4362293 (and ground eyelet terminal of 35 gallon tank gauge/pump unit), and torque ground
screw to 35 inch pounds.
CAUTION:
GROUND SCREW MUST BE TIGHTENED SECURELY TO OPERATE ELECTRIC PUMP AND GAUGE
UNIT.
FIGURE 3-A - 35 GALLON TANK
FIGURE 3-B - 22 GALLON TANK
Install red mold of body harness, PN 4362293, onto red stud of gauge/pump unit. Install yellow mold of harness, PN 4362293, onto black
stud of gauge/pump unit (Figure 3-A or 3-B).