B350 1 Ton Van V8-318 5.2L VIN Y FI (1988)
Trim Panel & Clip Retainers
1. Position the trim panel on the door inner panel with the clip retainers aligned with the holes.
2. Push inward and force the clip retainers into the door panel holes around the perimeter of the trim panel.
3. Right cargo door. Insert the lower protector half into the door handle opening and "seat" it in the lower part of the opening.
4. Right cargo door. Insert the upper protector half in the door handle opening and "seat" it in the upper part of the opening.
5. Right cargo door. Position the door inside handle on the actuator and install the retaining screw. Tighten the screw with 11 Nm (95 in. lbs.)
torque.