B350 1 Ton Van V8-318 5.2L VIN Y FI (1988)
Instrument Panel Trim
Instrument Panel Trim Removal
1. Remove the lower trim panel retaining screws from the instrument panel.
2. Remove the lower trim panels from the instrument panel.
3. Remove the trim plate retaining nuts from the interior of the instrument panel.
4. As applicable, separate the electrical controls and switches from the trim plate trim plate.
5. Remove the trim plate from the instrument panel.
Installation
1. Position the trim plate at the instrument panel and, as applicable, attach the controls and switches.
2. Install the trim plate retaining nuts at the interior of the instrument panel. Tighten the nuts with 1 Nm (10 in. lbs.) torque.
3. Position the lower trim panels on the instrument panel.
4. Install the lower trim panel retaining screws in the instrument panel. Tighten the screws with 2 Nm (20 in. lbs.) torque.
Instrument Panel Removal
1. Remove the instrument panel retaining screws from the dash panel.
