dodge Workshop Repair Guides

Dodge B350 1 Ton Van V8-318 Workshop Service and Repair Manuals

ABOUT US
Distance Sensor <--> [Vehicle Speed Sensor] > < Diagram Information and Instructions|Page 1322

Throttle Position Sensor Diagram - Component Information | Page 1323

Page 1
background image

Throttle Position Sensor: Service and Repair

1. Disconnect battery ground cable, then remove air cleaner.
2. Disconnect three way connector at throttle position sensor (TPS), then remove TPS to throttle body mounting screws.
3. Lift TPS from throttle shaft, then remove O-ring.
4. Reverse procedure to install. Install new O-ring and torque TPS to throttle body mounting screw to 20 inch lbs.

Distance Sensor <--> [Vehicle Speed Sensor] > < Diagram Information and Instructions|Page 1322