dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

All Technical Service Bulletins for Seat Bottom Frame: > < Rear Seat Anchor - Squawk Type Noise
Page 2
background image

5.

Install escutcheon and tighten screws until flush. Verify that stabilizer is fully seated. Only half of the stabilizer should be showing (Figure 2).

6.

Reinstall rear seats following directions in the appropriate Ram Van/Wagon Owners Manual.

POLICY:
Reimbursable within the provisions of the warranty.

TIME ALLOWANCE:
Labor Operation No:

23-20-41-95

(Two Bushings Installed Per Seat)

0.2 Hrs.

FAILURE CODE: P8 - New Part

All Technical Service Bulletins for Seat Bottom Frame: > < Rear Seat Anchor - Squawk Type Noise