B350 1 Ton Van V8-360 5.9L (1994)
9.
Apply Sealer, P/N 4318026, to the top of the door opening. The sealer should be applied over the existing sealers in the areas shown in Figure 5 to
smooth out the overlapping joints.
10.
Remove the window glass run channel from the door opening.
11.
Apply a 1/4" bead of Silicone Sealer, P/N 4318025, to the entire length of the inner channel (see Figure 6).
12.
Install the glass run channel making sure to avoid a gap at the vent window divider.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
23-50-01-96
1.4 Hrs.
FAILURE CODE: BX - Wind Noise
