dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fuel System - Hard Starting/Long Crank Times|Page 1710 > < Diagram Information and Instructions
Page 1
background image

Bowl Vent: Customer Interest
Fuel System - Hard Starting/Long Crank Times

Models

1985 360 4BBL Heavy Duty Trucks "D", "W" & "B" Models

Subject

Hard Hot Starts, Poor Fuel Economy

Index

DRIVEABILITY

Date

April 28, 1986

No.

18-26-86

P-1537C
SYMPTOM/CONDITION

Poor fuel economy, long crank times, and black smoke coming from the exhaust when starting a cool (not cold) engine. This symptom will be more
pronounced when the ambient temperature is below 60~ F.

This hard start condition is caused by the choke closing while the engine is still hot. This causes the engine to run rich.

PARTS REQUIRED

Driveability Package PN 4397709

Consists of:

2

Bolts, Pressure Tap Adapter

PN 6500499

1

Bowl Vent Valve

PN 5214336

1

Pressure Tap Adapter

PN 4241252

1

Wire Assembly

PN 4362459

1

Bolt, 6 mm x 14 mm - 1.0

PN 5240437

1

Nut, 6 mm x 1

PN 6100516

1

Tie Strap

PN 6015756

To be ordered separately:

1

Authorized Modification Label

PN 4275086

1

3/8" Hose

PN 4203421

1

3/16" Hose

PN 4105167

REPAIR PROCEDURE

This

bulletin authorizes changes in the bowl vent, the vapor

containment door located in the air cleaner housing, and a jumper wire to bypass the choke control switch.
To receive the greatest benefit of this drive package, it will be necessary to also install the heater hose reroute package as described in Technical Service
Bulletin #18-19-86.

STEP A - ELIMINATING CHOKE CONTROL SWITCH

1.

Remove the electrical leads from the choke control switch.

2.

Install the switch jumper wire, PN 4362459, supplied to the electrical leads removed from choke control switch.

STEP B - DISABLING THE AIR CLEANER VAPOR CONTAINMENT TRAP DOOR

Fuel System - Hard Starting/Long Crank Times|Page 1710 > < Diagram Information and Instructions