B350 1 Ton Van V8-360 5.9L VIN W 4-bbl (1988)
Sliding Door Interior Trim Panel: Service and Repair
Door Trim Panel
DOOR TRIM PANEL REMOVAL
1. Remove the retaining screws and the door pull handle.
2. Use a trim removal tool (or another appropriate flat blade tool) and carefully pry the trim panel away from the door inner panel. Remove the trim
panel from the door.
INSTALLATION
1. Position the trim panel on the door inner panel and press inward around the perimeter of the panel to attach the retainers to the inner panel.
2. Position the door pull handle on the trim panel with the screw holes aligned.
3. Install the pull handle retaining screws and tighten them with 4 Nm (35 in. lbs.) torque.
