B350 1 Ton Van V8-360 5.9L VIN W 4-bbl (1988)
Band: Adjustments
Front Band Adjustment
Fig. 24 Kickdown band adjusting screw location
The kickdown band adjusting screw is located on left side of transmission case, Fig. 24.
1.
Raise and support vehicle, then loosen adjusting screw locknut and back off nut approximately 5 turns.
2.
Turn adjusting screw and check for binding. If screw binds, lubricate threads as required.
3.
Torque adjusting screw to 72 inch lbs. on 1987-88 vehicles or 47-50 inch lbs. on 1989-92 vehicles, then back off adjusting screw 2 1/2 turns.
4.
While holding adjusting screw in position, torque locknut to 30 ft-lbs, on all Chrysler vehicles and 1989-92 Jeep vehicles or 35 ft-lbs, on 1988
Jeep vehicles.