B350 1 Ton Van V8-5.9L VIN Z (1992)
Front Latch
6. Remove the latch from the door via the access opening.
INSTALLATION
1. Position the latch in the door via the access opening.
2. Align the screw holes and install the latch retaining screws in the door panel. Tighten the screws in the side, inner panel with 11 Nm (95 in. lbs.)
torque. Tighten the screws in the inner panel with 23 Nm (200 in. lbs.) torque.
3. Connect all the rods to the latch.
4. Install the latch access cover.
5. Install the door outside and inside handles.
6. Install the door inside trim panel.
LATCH ROD ANTI-RATTLE BRACKET REMOVAL
1. Remove the door inside trim panel.
latches, Handles & Rods
2. Remove the door inside and outside handles.
3. Remove the front latch access cover.
