B350 1 Ton Van V8-5.9L VIN Z (1992)
Right Side Trim Panels
Left Side Rear Trim Panels
3. Remove the trim panel attaching screws from the body interior side and rear cargo door header panels.
4. Remove the trim panels from the body interior panels.
INSTALLATION
To ensure correct alignment when installing interior trim panels, first install the attaching screws "finger-tight", align the trim panel at each end
and then tighten the screws with the specified torque. Avoid over-tightening the attaching screws because this can damage the trim panel and/or the
body panel screw holes.
1. Position the trim panels at the body interior side panels with the screw holes aligned.
2. Install the trim panel attaching screws in the body interior side panels. Tighten the screws with 2 Nm (17 in. lbs.) torque. Avoid over-tightening
the screws.
3. If removed, install the rear passenger seats. If necessary refer to the installation procedures.
