B350 1 Ton Van V8-5.9L VIN Z (1992)
Trunk / Liftgate Weatherstrip: Service and Repair
Dual Cargo Doors
Right Door-To-Body Weatherstrip Seal
Left Door-To-Body Weatherstrip Seal
The side and rear door weatherstrip seals are identical.
Each door-to-body weatherstrip seal is attached to the door inner panel with adhesive and integral retainers that are inserted into the panel holes.
RIGHT DOOR WEATHERSTRIP REMOVAL
1. Open the cargo door.
2. Start at an upper corner and pull outward on the seal to separate the retainers from the holes in the door inner panel.
3. Continue around the perimeter of the seal and pull outward on the seal to separate the retainers from the holes in the door inner panel and the
adhesive.
4. Remove the seal from the door.
5. Remove the residual adhesive from the door inner panel.
INSTALLATION
The door-to-body weatherstrip seal is installed by inserting the integral retainers in the door inner panel holes around the perimeter of the door.
