B350 1 Ton Van V8-5.9L VIN Z (1992)
5.
Remove (IAC) motor and O-ring from the throttle body.
6.
Install the new (IAC) Motor and O-ring, reversing the above procedure.
7.
Connect the 60-way connector to the (PCM).
8.
Start the vehicle and allow to warm up to normal operating temperature.
9.
With the parking brake applied, let the vehicle idle in drive (if manual transmission in neutral) for a minimum of five (5) minutes with the A/C off.
This allows the (PCM) to learn the idle position.
POLICY:
Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No:
14-30-23-98
1992-1994 AD, AN, ZJ, BR
0.3 Hrs
1992-1994 AB
0.5 Hrs
FAILURE CODE: P8 - NEW PART
