B350 1 Ton Van V8-5.9L VIN Z (1992)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
WARNING: HOT, PRESSURIZED COOLANT CAN CAUSE INJURY BY SCALDING. COOLING SYSTEM MUST BE PARTIALLY
DRAINED BEFORE REMOVING THE COOLANT TEMPERATURE SENSOR.
Coolant Temperature Sensor Location
REMOVAL
1.
Partially drain cooling system.
2.
Disconnect electrical connector from sensor.
3.
Remove sensor from intake manifold.
INSTALLATION
1.
Install sensor.
^
Tighten to 27 Nm (20 ft. lbs.) torque.
2.
Connect electrical connector to sensor.
3.
Replace any lost engine coolant.
