B350 1 Ton Van V8-5.9L VIN Z (1992)
Ignition Hall Effect Sensor: Service and Repair
REMOVAL
1.
Remove distributor cap. Refer to Distributor Removal and Installation.
Distributor Rotor Removal
2.
Remove ignition rotor from distributor shaft.
Distributor Pick-up - Removal/Installation
3.
Remove hall effect pick-up attaching screws on opposite sides of the distributor housing and carefully lift the hall effect pick-up assembly from the
distributor housing.
INSTALLATION
^
To install hall effect pick-up assembly, follow the preceding procedure in reverse order.
