B350 1 Ton Van V8-5.9L VIN Z (1992)
Upstream Solenoid: Service and Repair
Switching Solenoids Replacement
NOTE:
The solenoids are mounted to a bracket at the rear of the engine on the right side cylinder head cover.
Serviceing The Solenoid Pack
REMOVAL/INSTALLATION
1.
Remove vacuum hose and electrical connector from solenoids.
2.
Remove mounting bracket fastener.
3.
Depress tab on top of solenoid to be replaced and slide the solenoid downward out of mounting bracket.
4.
Reverse above procedure to install.
