B350 1 Ton Van V8-5.9L VIN Z (1992)
The other wire colors will match.)
4.
Strip one half inch of insulation from each wire and twist each pair of matching wires together. Solder each connection using a ROSIN CORE
solder. Center the heat shrink tubing over the joint. Using a heat gun, heat the joint until the tubing is tightly sealed and sealant comes out of both
ends of the tube.
5.
Install the wiring in its original routing and connect the wiring to the crank position sensor.
POLICY: Reimbursable within the provisions of the warranty.
TIME ALLOWANCE:
Labor Operation No.
** 08-15-79-91 **
0.5 Hrs.
FAILURE CODE:
83 - Connection Loose
