B350 1 Ton Van V8-5.9L VIN Z (1992)
Lower Housing And Components
1.
Install the solenoid assembly and gasket. Tighten the solenoid attaching screws to 8 Nm (72 lb-in).
3-4 Accumulator Removal
2.
Install the 3-4 accumulator on the lower housing. Be sure the valve springs and lock-up valve plug are properly positioned before tightening
accumulator screws.
3.
Attach solenoid case connector to 3-4 accumulator with the shoulder type screw. The connector has a small locating tang that fits into a dimple in
the top of the accumulator housing. Seat the tang in the dimple before tightening the connector screw.