Caliber L4-2.0L (2008)
Rear Door Latch: Service and Repair
Rear Door Latch - Installation
INSTALLATION
1. Install latch into door (1) and align latch (2) with fastener openings.
2. Install fasteners (4) into latch (2). Tighten to 9 Nm (7ft.lbs.)
3. Connect rod (4) to latch (3).
4. If equipped, connect wire connector to latch.
5. Install door module.
6. Install bolster. See: Rear Door Panel/Service and Repair/Rear Door Plugs - Removal
7. Install door plugs. See: Rear Door Panel/Service and Repair/Rear Door Plugs - Removal