Caliber L4-2.0L (2008)
1. Connect center console housing wire connector (2) with instrument panel connector (3).
2. Place console housing (1) over shifter lever ensuring console tabs seat properly.
3. Install screws (1).
4. Replace shift bezel and knob. See: Console Shifter Bezel - Installation See: Console Shifter Bezel - Installation.
Center Console - Removal
REMOVAL
1. Pull back on parking brake (5) to the upright position.
2. Remove front screws (1) fastening center console to front floor bracket (6).
3. Open console door and remove two screws (1) fastening console to rear floor bracket (3).
4. Disconnect center console wire connector (2) to instrument panel connector.
5. Remove from vehicle.