Caliber L4-2.0L (2008)
Drink Holders: Service and Repair
Installation
BEVERAGE COOLER
NOTE: LHD model shown. RHD model similar.
1. Position the beverage cooler outlet (3) to the top of the storage bin and engage the four retaining tabs (4) by sliding the outlet toward the center of
the instrument panel top cover (1). Make sure the tabs are fully engaged.
2. Connect the hose (2) to the beverage cooler outlet.
3. Install the instrument panel top cover See: Dashboard / Instrument Panel/Service and Repair/Instrument Panel Cover - Installation.